Last updated November 21, 2026
Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGarage Door Cost Breakdown: The Arlington Homeowner’s Reference for 2026
That $89 tune-up you saw advertised around Arlington sounds like a deal until you read what it leaves out. Cable inspection and bearing replacement sit outside most cut-rate specials, and those are two of the parts most likely to fail within a few months of a spring job. A price tag that low isn’t dishonest on its own, but it tells you nothing about what a complete quote should itemize. This guide walks through real cost ranges, shows you what line items belong on a written estimate, and explains the parts-level differences (spring cycle ratings, opener brand tiers, door materials) that swing the number up or down. By the end you’ll be able to read an Arlington garage door quote and know whether it’s complete.
Quick Answer
Garage door repair in Arlington usually runs from about $150 for a minor part swap to $600 or more for a spring replacement paired with opener work. A full new door installation typically lands between $1,100 and $4,500 depending on material and brand, and a single torsion spring replacement alone sits around $180 to $340. These are typical estimated ranges, not quotes. The written estimate you get after we measure your door sets the final price.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Table of Contents
- How much does garage door repair cost in Arlington?
- What does a torsion spring replacement actually cost?
- Labor rates and what a cheap quote leaves out
- Opener repair and installation cost by brand
- Full door replacement cost by material and brand
- Repair or replace: the crossover point
- How to read an Arlington garage door quote
- Common mistakes to avoid
How much does garage door repair cost in Arlington?
Most repairs in Arlington fall into a predictable set of ranges, and knowing them helps you spot a quote that’s incomplete or padded. The plain fact is that a single number can’t tell you much: a “spring replacement” quote means one thing if it’s a single spring on a one-car door and something different for a matched pair on a double door. The ranges below assume a standard residential door.
| Job | Typical estimated range | What affects it |
|---|---|---|
| Emergency spring repair (single spring) | $180 – $340 | Cycle rating, door weight, whether cables are also replaced |
| Matched pair of springs (double door) | $360 – $680 | Both springs replaced together, plus cables and bearings |
| Opener repair (board, motor, sensor) | $150 – $400 | Brand, age of the unit, part availability |
| Opener replacement (installed) | $300 – $600 | Belt vs. chain drive, WiFi, battery backup |
| Panel replacement (per section) | $150 – $450 | Material, color match, brand |
| Cable and roller replacement | $150 – $300 | Number of cables, door size |
| Full new door (installed) | $1,100 – $4,500 | Material, insulation, brand, opener included |
A few things to understand about these numbers. First, a matched pair of springs costs roughly double a single spring, because the two usually get replaced together even if only one has failed. Replacing one of a matched pair and leaving the other is a false economy: the surviving spring has the same wear history, so it tends to fail soon after. Second, the ranges are for the repair alone, and a quote that adds cable replacement, bearing assessment and an opener safety test will legitimately sit at the higher end. That’s not padding. That’s a complete job. When you call us at (866) 937-7921, we can walk through which range fits your door before anyone shows up.
What does a torsion spring replacement actually cost?
A torsion spring replacement in Arlington typically costs $180 to $340 for a single spring, and $360 to $680 for a matched pair on a double door. The cost depends heavily on the cycle rating you choose, because a 25,000-cycle spring costs more up front than a 10,000-cycle spring but can last far longer in daily use.
Cycle rating is the single most misunderstood number on a spring quote. A cycle is one full open and one close. A standard 10,000-cycle spring is fine for a door that runs a few times a day. A 25,000-cycle spring makes sense for a household where the door opens and closes often, and for doors that carry more weight. Here’s how the parts-level pricing usually breaks down:
- 10,000-cycle torsion spring (single): the standard replacement, priced at the lower end of the single-spring range.
- 25,000-cycle torsion spring (single): a higher-grade spring, priced toward the top of the single-spring range.
- Matched pair, 10,000-cycle: both springs on a double door, priced at the bottom half of the pair range.
- Matched pair, 25,000-cycle: both springs at the higher rating, priced at the top of the pair range.
A complete spring job is more than the springs. It should also include a cable inspection, a bearing assessment and an opener safety test, because a spring failure puts sudden stress on the cables and the opener carriage. That’s why the $89 tune-up is a false floor: the springs alone cost more than that, and the safety checks are what keep the door from failing again a few weeks later. A quote that promises an $89 spring replacement is a quote missing something.
One safety note that matters more than any price: torsion springs are under high tension and store enough energy to cause serious injury. Never attempt to adjust, release or replace a spring yourself. Leave it to a trained professional. Our technicians have up to 13 years of experience handling high-tension spring work, and we treat every spring job as a safety job first.
Labor rates and what a cheap quote leaves out
Labor on a garage door repair in the Arlington area generally runs $60 to $120 per hour, and most repairs take one to three hours. A quote that’s well below that band is not necessarily a bargain. It’s often a quote that has trimmed the job down to the visible part and left out the checks that keep it from failing again.
Here’s what a suspiciously low quote usually omits:
- Cable replacement. A spring failure often stresses the lift cables. A quote that replaces the spring but skips the cables can leave you with a door that fails again soon after.
- Bearing assessment. Worn bearings add drag and strain the opener. Checking them is part of doing the job right.
- Opener safety test. Every opener has a safety reverse feature. It should be tested after any spring or cable work, not skipped to save ten minutes.
- Balance test. A properly balanced door should hold its position when released halfway. A low quote often skips this, and an unbalanced door wears parts out fast.
- Track and roller inspection. Bent tracks and flattened rollers cause premature wear. A few minutes of inspection saves a return visit.
A complete, honest quote names the parts, states the cycle rating, and tells you what’s being inspected. If a quote is a single number with no itemization, ask what’s included. A competent Arlington garage door pro will answer without hesitation. We work on the brand already in your garage, so we’re not guessing what’s inside your door; we’re pricing the actual repair. A quote is quoted and agreed before any work starts, and the written estimate sets the final price, so you know what you’re paying before a single tool comes out.
Opener repair and installation cost by brand
Opener installation in Arlington usually runs $300 to $600 installed, and the brand and features drive most of that spread. Repair (a circuit board, a motor, a safety sensor) typically costs $150 to $400. Whether the pricier WiFi or battery-backup models are worth it comes down to how you use the door.
The three dominant brands each sit in a slightly different spot:
- LiftMaster: the higher end of the range. Belt-drive and WiFi models are common, and the parts are well-supported when something fails.
- Chamberlain: similar to LiftMaster in many respects, priced slightly lower in most tiers. WiFi and battery backup are available on the upper models.
- Genie: solid mid-tier pricing, good for straightforward chain-drive replacements on doors where simplicity is the goal.
On the WiFi and battery-backup question: WiFi remote control is genuinely convenient if you want to open the door for someone while you’re out, and battery backup is worth the upcharge in a household where losing the door during a power cut would be a real problem. If those features don’t matter to you, a plain belt-drive model does the job and costs less. What we don’t recommend is paying for features and skipping the repair when a sensor or board fails. That’s where opener-specific repair expertise saves you a full unit replacement. We work on LiftMaster, Chamberlain and Genie units regularly, along with Craftsman and Raynor, so a repair is often the better call than a new opener.
If your opener is on its last legs, though, a full replacement makes more sense than a fourth repair in a year. That’s a conversation to have with a technician who can look at the actual age and model of the unit in front of them.
Full door replacement cost by material and brand
A full new garage door in Arlington typically costs $1,100 to $4,500 installed. The material and brand drive most of the spread, and the price moves up or down based on what you pick at the dealer.
Material first. A basic steel door sits at the low end. A steel door with insulation and a better finish moves up. A carriage-style or custom door with windows and premium hardware sits at the top. Wood is a different conversation entirely and typically costs more than its steel equivalent.
Brand tier matters too. Clopay, Amarr and CHI are common choices in Arlington, and each has a range from entry-level to premium:
- Clopay: a wide range from basic steel to insulated carriage-style. Predictable pricing across the tiers.
- Amarr: strong on insulated steel and traditional styling. Mid-range pricing in most tiers.
- CHI: solid on both steel and carriage house styles, often with competitive pricing on the premium end.
The three things that add the most to any door price are windows, insulation and hardware upgrades. Windows are labor and material; insulation adds cost but pays off in a garage used as a workshop or living space; hardware (hinges, handles, decorative trim) adds a small amount but changes the look. A full replacement is scheduled work: it’s measured, ordered and installed on a set date, not squeezed into an afternoon. We give you a written estimate after we measure, and you’ll know the final price before anything is ordered. Our garage door installation service covers the full job from measurement to the finished door.
Repair or replace: the crossover point
Replace the door when the repair cost approaches the installed price of a new door, or when the door has more than one failing system at once. As a rough rule, if two of these three are true (springs failing, panels dented or bowed, opener on its way out), the math usually favors replacement rather than chasing repairs.
Here’s how to think about the crossover:
- Add up the repairs. Springs, cables, panels, opener, hardware. A typical set of multiple repairs can approach $700 to $1,000.
- Compare to a new door. A basic installed steel door starts around $1,100. If your repair total is within a few hundred dollars of a new door, replacement makes more sense.
- Look at the age of the door. A door that’s had one major repair in the last year is likely due for another. A door that’s mostly original and just needs a spring is a repair.
- Consider the opener separately. A new door doesn’t have to mean a new opener. Sometimes the opener is fine and only the door needs replacing.
The honest answer is that it depends, and we don’t recommend replacement when a repair will do. Diagnosed and fixed, not replaced and upsold is how we work. A repair-first approach means you’re not paying for a door you don’t need.
How to read an Arlington garage door quote
A complete quote has six things on it, in writing, before any work starts. If a quote is missing most of these, ask for a revised one. Reading a quote well is the single best way to avoid paying more than you should in Arlington.
- The parts, named. The specific spring, cable, roller or opener part. Not “spring replacement” alone.
- Cycle rating on any spring. 10,000 or 25,000, and single vs. pair.
- Labor hours or a flat labor price. Not just a total.
- What’s inspected. Cables, bearings, opener safety test, balance. Spelled out.
- Total price, in writing. The number you’ll pay, not a range.
- No work starts until you agree. The price is quoted and agreed before anyone begins.
If a quote doesn’t state the price in writing, that’s the first thing to ask about. On installation and replacement, the process is measurement, then written price, then scheduling. Free estimates mean you can get the number before you commit. Our garage door repair service handles the diagnosis and the repair, and we bring parts for the brands we work on, which cuts down on the “we’ll have to order that” delay. If the problem turns out to be the opener, garage door opener repair covers the electronics side so you’re not sent to a second company for a separate visit. One call covers it: parts, repair, installation.
Common Mistakes to Avoid
- Accepting a spring quote without a cycle rating. A price with no rating tells you nothing about how long the spring will last. A cheap spring that fails in a year costs more than a better one. Ask for the rating in writing.
- Replacing one spring of a matched pair. If both springs were installed at the same time, they’ve had the same wear. Replace the pair, or expect a second repair soon.
- Letting a tune-up skip the cable inspection. Cables and bearings are what keep the door from failing again after a spring job. An $89 tune-up that skips them is not a complete job.
- Paying for a full opener replacement when a board or sensor failed. Most opener repairs are cheaper than a new unit. Get a diagnosis before you agree to a replacement.
- Choosing a door material by price alone. An uninsulated steel door in an Arlington garage used as a workshop or living space will leave you cold twice over. Match the material to how the garage is actually used.
- Signing a quote with no written total. If the number isn’t on paper before work starts, ask for it. The written estimate is the price.
- Assuming “garage door” and “garage door opener” are the same repair. They’re different systems, and a quote that conflates them is a quote from someone who doesn’t work on both.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional
Some garage door problems are a nuisance. Others are a safety issue, and a few can cause real damage if you wait. Call a pro if the door is stuck open or closed, if you hear a loud snap (a spring failure), if the door is visibly crooked in its tracks, if the opener runs but the door doesn’t move, or if the door reverses unexpectedly or doesn’t reverse when it should. Those last two are safety concerns and shouldn’t be ignored.
For anything involving springs, cables or the opener’s electrical components, leave it to a trained technician. Springs store enough energy to injure, and the opener wiring is line voltage. Our technicians have up to 13 years of experience with exactly these jobs. Arlington Garage Door Repair Co offers free estimates in Arlington – call (866) 937-7921, and we’ll help you figure out whether it’s a repair or a replacement before you commit to anything.
Frequently Asked Questions
Most garage door repairs in Arlington run from about $150 to $600, with spring replacements around $180 to $340 for a single spring and $360 to $680 for a matched pair. The written estimate after inspection sets the final price. Call (866) 937-7921 for a free quote.
Yes, a matched pair costs roughly double a single spring: $360 to $680 versus $180 to $340. Springs on a double door are replaced together because they share the same wear, so replacing one of a matched pair usually just delays a second repair. Call (866) 937-7921 for an exact quote on your door.
It depends on what’s failing. If the springs, panels or opener are failing together and the repair total approaches the installed price of a new door ($1,100 and up), replacement usually makes more sense. If it’s a single part failure, repair is the better call. Call (866) 937-7921 and we’ll walk through it with you.
Yes, if you want WiFi control or battery backup. Belt-drive LiftMaster and Chamberlain models sit toward the higher end of the $300 to $600 installed range, and the parts are well-supported for repair later. A plain Genie chain-drive does the basic job for less. Call (866) 937-7921 to talk through the models that fit your door.
Usually the cable inspection and bearing replacement, which are two of the parts most likely to fail after a spring job. A complete service also includes an opener safety test and a balance test. Ask what’s included before you book. Call (866) 937-7921 for a complete estimate.
The local professionals we connect you with are licensed and insured as their state requires, and spring work should always be done by a trained technician because of the stored tension. Our technicians have up to 13 years of experience. Call (866) 937-7921 with any questions before you book.
The Bottom Line
Garage door costs in Arlington come down to parts, labor and what’s included. A single spring replacement is $180 to $340; a matched pair is $360 to $680; a new door is $1,100 to $4,500. The number that matters most is the written estimate, because that’s the price you pay. Read the quote for the cycle rating, the cable and bearing assessment, and the opener safety test. If any of those are missing, ask. A complete quote is a complete job, and a complete job is what keeps your door working. For a free estimate in Arlington, call Arlington Garage Door Repair Co at (866) 937-7921.
Written by the team at Arlington Garage Door Repair Co.