Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Parts for Arlington Homeowners
A grinding opener, a door that slams down, a frayed cable hanging loose – most garage door failures come down to one worn part, and the right replacement gets the door working safely again. Arlington Garage Door Repair Co handles parts, repair, and installation together, so you’re not waiting on a second company to order what the first one couldn’t source. Our technicians have up to 13 years of experience and work on the brands that are actually in Arlington garages, from LiftMaster openers to Clopay doors. We answer 24/7 and offer fast dispatch from 7am to 7pm for repair calls. Call (866) 937-7921 and we’ll diagnose the part that failed, quote a price, and get a written estimate agreed before anyone touches the door.

Key takeaways
- One company handles diagnosis, the replacement part, and the repair – no outside referrals.
- Torsion spring repair typically runs $180 – $340 for one spring in Arlington.
- Your written estimate sets the price before work starts.
- We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment.
What Our Garage Door Parts Service Includes
Torsion Spring
Torsion springs are the horizontal coils mounted above the door that carry its weight through every open and close. They snap from metal fatigue, and when one lets go the door can drop hard or refuse to lift at all. We replace torsion springs with matching wire gauge and cycle rating, and we balance the door afterward so the load is even across both springs.
Extension Spring
Extension springs run along the sides of the track and stretch to lift the door, and older Arlington homes still have plenty of them. They fail from stretch and rust, and when they break they can fly loose of the track. We fit replacement springs rated for the door’s weight and check the safety cables that keep a broken spring from doing damage.
Cables & Drums
The cables wind around the drums at the end of the torsion bar and transfer the spring’s lift to the door. A cable that’s frayed, kinked, or slipped off the drum makes the door drag or hang crooked. We replace the cable set and reseat the drums, then set the torsion so the door travels evenly on both sides.
Rollers & Hinges
Rollers ride inside the track and hinges connect the panels, and both wear out on a door that opens every day. A squealing door, a door that shudders as it rises, or a panel that rattles usually points to worn nylon or steel rollers and loose hinges. We replace the full roller set and the hinges that show wear so the door runs quiet and the panels stay aligned.
Weatherstripping
Weatherstripping seals the sides and top of the door frame against drafts, rain, and insects. Florida heat and humidity wear it down until it cracks or pulls free, which lets the outside in and drives up cooling bills. We replace the perimeter seals along the jambs and header so the door closes against a tight frame in the Arlington summer.
Bottom Seal
The bottom seal is the rubber bead that runs along the door’s lowest panel and meets the floor. It takes the most wear of any part on the door, and a stiff or torn seal lets water, pests, and heat under the door. We fit a replacement seal sized to the door’s retainer style, whether that’s a T-bulb, a U-seal, or a slide-in bead.
If the failed part points to a bigger problem, we handle garage door repair across Arlington in the same visit where possible. A bad opener is a different job all its own, and we cover garage door opener repair as a dedicated service.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Parts
We work on the brand already in your garage, not just the one that’s convenient for us. LiftMaster and Chamberlain openers are among the most common in Arlington homes, and we know their logic boards, travel limits, and gear assemblies well enough to replace just the failed part instead of the whole unit. Genie openers show up often too, and their older belt and screw drives still run when the right drive gear and carriage get swapped in. On the door side, Clopay panels and hardware come through our hands often, so we match rollers, hinges, and bottom seals to the panel profile that’s actually on the door.
We also service Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we know where each of those brands tends to wear first. Whether you have Clopay, LiftMaster, Genie, or any other make we service, we can help, and we’ll tell you plainly when a part is worth replacing and when it isn’t. Walking through garage door parts is what we do, so we won’t push a full replacement you don’t need.

Signs You Need Garage Door Parts Right Now
- A loud bang from the garage. A torsion spring snapping sounds like a gunshot and usually means the door won’t lift. That’s a part failure to address before anyone tries the opener again.
- The door hangs crooked or binds in the track. A stretched cable or worn roller is usually the cause, and forcing the door makes the damage worse. Stop using the door and get it looked at.
- Grinding, squealing, or shuddering as the door moves. Worn rollers and dry hinges announce themselves with noise long before they fail. Replacing them early is cheaper than the track damage that follows.
- A gap of daylight under or around the door. A failed bottom seal or perimeter strip lets water and heat in. New seals close the gap and cut the load on your AC.
- The opener strains but the door barely moves. A door that’s out of balance overloads the opener and burns out its gears. Fixing the spring or cable problem protects the whole opener.
Our Garage Door Parts Process – Step by Step
- 1
Diagnose on site. We test the balance of the door by hand, inspect the springs, cables, drums, and rollers, and check the opener’s travel and force settings. That tells us which part failed rather than guessing from the symptom.
- 2
Quote before we touch anything. We walk you through what failed, why, and the exact part cost. The price is quoted and agreed before any work starts, so the written estimate sets the final price.
- 3
Source the right part. We match the replacement to the door’s weight, spring wire gauge, and retainer style, and to the opener brand if electronics are involved. Parts availability is part of the service, which cuts the old “we’ll have to order that” delay.
- 4
Replace and rebalance. We install the part, set torsion tension or cable travel, and test the door by hand and with the opener. The door should move smoothly and stay where you leave it.
- 5
Test and hand off. We run the door through full open and close cycles, check the safety reverse, and show you what we replaced. If a second part is on its way out, we tell you now so you can plan.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Parts Cost in Arlington?
Garage door parts pricing in Arlington depends on the part, the door, and whether it’s a pair. A typical torsion spring replacement runs $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair costs about twice that range. Cable repair typically runs $130 – $250, roller replacement $110 – $220, and track realignment $120 – $240. When the failed part sits on the door panel itself, panel replacement runs $250 – $500, and a whole repair call usually lands between $150 and $600 depending on how many parts are involved.
What moves the price: the spring’s wire gauge and cycle rating, the number of rollers or hinges, whether a cable job needs new drums, and whether your opener brand means a specific control board. How to avoid overpaying: get the diagnosis and the quote before parts are ordered, and don’t let anyone replace a full opener when the failed part is a gear or travel limit. Every free estimate includes a full balance and safety check, and the written estimate sets the final price so the invoice matches the quote. Call (866) 937-7921 for a free estimate.
Garage Door Parts Near Arlington – Our Service Area
We cover garage door parts across Arlington and the surrounding neighborhoods, from Riverside and Avondale to San Marco and Southside. Doors in Baymeadows and Deerwood get the same diagnosis and quote, and we reach Ortega and Oceanway for repairs too. If you’re farther out toward Yulee or Nassau Village-Ratliff, call and we’ll set a visit. Wherever you are, we handle the garage door parts and repairs the same way, with a written estimate before work starts.
Serving Arlington, FL – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Parts in Arlington
Any component that makes the door move, seal, or open safely: torsion and extension springs, cables and drums, rollers, hinges, weatherstripping, bottom seals, and the opener’s moving parts. We handle all of these in one place instead of sending you from one shop to another. Call (866) 937-7921 and describe what’s happening and we’ll point to the likely part.
Most single-part repairs finish on the same visit, usually within a couple of hours once the right part is on hand. A spring or cable job takes longer than a roller swap because the door needs rebalancing and testing afterward. If a part has to be sourced, we’ll tell you the timeline up front. Call (866) 937-7921 to book a visit.
Typical estimates in Arlington run $150 – $600 for a repair call, with torsion spring replacement at $180 – $340 for one spring and cable repair at $130 – $250. A pair of torsion springs costs about twice the single-spring range, since they’re usually replaced together. The written estimate sets the final price before work starts. Call (866) 937-7921 for an exact quote, and estimates are free.
Yes. We service LiftMaster, Chamberlain, and Genie opener equipment along with Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors. We know where each brand tends to wear and replace the failed part rather than the whole unit. Call (866) 937-7921 and tell us your brand and the symptom.
We answer 24/7, so you can reach us any time a part fails. For urgent repairs we offer fast dispatch from 7am to 7pm. If you call after hours, we’ll book your visit and quote the job before anything starts. Call (866) 937-7921.
Warranty coverage depends on the part and the manufacturer’s terms, so we’ll confirm it with you before we install anything. We don’t promise coverage we can’t back, and we’ll put the terms in writing. Ask us when we quote the job. Call (866) 937-7921 with your questions.
Clear the floor under the door, keep cars out of the garage bay, and leave the door in the position it’s in when it failed. Don’t force a door with a broken spring or cable, since that risks injury and more damage. Have your door and opener brand ready if you can. Call (866) 937-7921 to schedule.
Schedule Your Garage Door Parts Service in Arlington Today
Get the failed part diagnosed, the right replacement fitted, and the door balanced again. We answer 24/7, quote the job before work starts, and give a free, no-obligation estimate. Our technicians have up to 13 years of experience with the brands already in Arlington garages. Call (866) 937-7921 to schedule your visit, and for the full range of what we do, start with Arlington Garage Door Repair Co.
Written by the team at Arlington Garage Door Repair Co.