Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Arlington Homeowners
A broken garage door spring strands your car and leaves a door that’s too heavy to lift safely. Garage door spring repair in Arlington typically costs $180 – $340 for one spring, and most jobs are diagnosed and fixed the same day you call. Our technicians have up to 13 years of experience with torsion and extension systems, and we work on the brand already in your garage – LiftMaster, Chamberlain, Genie, Clopay and others. A snapped spring is not a job to test yourself; those coils carry enough stored tension to break a hand or worse, so leave it to a trained professional. Call (866) 937-7921 and we’ll get a technician out to Arlington fast, with the price quoted and agreed before any work starts.

What Our Garage Door Spring Repair Service Includes
Springs come in two families – torsion and extension – and each fails in its own way. Here’s what each part of the job covers when you book garage door spring repair with us.
Torsion Spring Replacement
A torsion spring is the coiled steel bar mounted above the door that does the actual lifting work as the door travels up and down. You need replacement when the door feels dead heavy, you hear a loud snap from the garage, or you spot a visible gap in the coil. Our technicians measure the old spring’s wire size and length, match it to the door’s weight, and wind the new one with the proper turns so the door balances correctly.
Extension Spring Replacement
Extension springs run along the sides of the door on a track and stretch as the door closes, then pull it back open. They’re common on older and lighter doors, and when one lets go the door can slam down hard on one side. We replace them in matched pairs so the door lifts evenly, and we check the surrounding hardware while we’re in there.
Broken Spring Repair
A broken spring is the most common call we get, and it usually announces itself: a bang from the garage, a door that won’t open, or one that lifts a few inches and stops. Sometimes the break is a clean split you can see, other times the coil has cracked invisibly and the door just won’t balance. We diagnose it on the spot and tell you plainly whether it’s a repair or a replacement.
Spring Adjustment
Sometimes the spring isn’t broken – it’s just out of tune, and the door drifts up or slams down instead of holding where you leave it. Adjustment means resetting the tension so the door balances at any height and the opener doesn’t have to strain. It’s a quick service that quietly protects your opener and the door’s panels from wear.
Safety Cable Installation
Safety cables thread through the center of each extension spring so that when the spring snaps, the pieces are contained instead of flying across the garage. Older doors often have springs with no cables at all, which is a real hazard given the force involved. We install cables rated for the spring’s load and route them correctly on both sides.
Spring Inspection
A spring inspection is a hands-off check of the coils, cables, drums, and door balance before anything fails. We look for rust, gaps, uneven wear, and the early signs that a spring is near the end of its life. It’s worth doing if your door is noisy or sluggish, or if you simply don’t know how old the springs are – knowing ahead beats a snapped spring on a busy morning.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the brand already in your garage, which matters more than most homeowners realize. Springs and hardware are matched to a door’s weight and opener’s capacity, and knowing how a manufacturer builds its doors means we diagnose the real problem instead of guessing. We service LiftMaster and Chamberlain systems and know how their openers handle spring tension and travel limits. We’re equally at home with Genie equipment and its specific spring and cable arrangements, and with Clopay doors where the panel weight dictates the spring spec.
Our familiarity runs across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers. Whether you have a Clopay door with a Chamberlain opener or any other combination in that list, we can help – and if your setup is a brand we don’t name here, tell us on the call and we’ll let you know honestly. A matched spring, correct cable, and balanced door are what keep the whole system working, and we handle all of it on the same visit where parts allow.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A spring breaking sounds like a gunshot or a heavy metal snap, often followed by silence and a door that won’t move. That bang is the spring letting go, and the door is now too heavy to lift by hand.
- The door is extremely heavy or won’t stay up. If lifting the door by hand feels like moving a wall, or it slams down instead of holding halfway, the spring has lost its ability to balance the door. Don’t force it – that’s how cables and panels get damaged.
- The door opens a few inches and stops. A door that lifts a bit then stalls usually has a broken spring or a cable off its drum. The opener is working, but the spring can’t assist the lift, so it gives up partway.
- Visible gap or stretched coil. A clear break in the torsion coil, or an extension spring that looks stretched out and longer than the one beside it, means it’s time for replacement. Springs don’t heal, and the matching spring on the other side usually isn’t far behind.
- Door drifts or slams unevenly. An unbalanced door that rises crooked or drops fast on one side points to a spring that’s out of adjustment. Left alone, that strain wears out the opener and puts more load on the good spring.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis. When you call, we ask what the door is doing – the sound, whether it moves, whether you can see a break – so we arrive with the right springs and tools for your door’s make and model. That’s how we avoid the “we’ll have to order that” delay that leaves you stuck for days.
- 2
On-site safety inspection. The first thing our technician does is check that the door won’t move unexpectedly: cables, drums, tracks, and the opener’s tension are all assessed before the spring work begins. Springs hold serious stored force, and we treat the whole assembly with the caution it demands.
- 3
Measure and match. We measure the old spring’s wire gauge, inside diameter, and length, then confirm the door’s weight and opener capacity. A spring that’s even slightly off spec will wear fast or leave the door unbalanced, so getting the match right up front is the whole job.
- 4
Quote before we touch it. You get a clear, upfront price – no surprises, no upsell to parts you don’t need – and the figure is quoted and agreed before any work starts. If we find a related issue (a worn cable, a frayed safety cable, a tired roller), we show you and let you decide.
- 5
Replace, tension, and test. We install the new spring or springs, wind the tension, balance the door by hand, and run the opener through a full open-and-close cycle. Then we walk you through what we found and how to spot trouble early.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Arlington?
A typical garage door spring repair in Arlington runs $180 – $340 for one spring, and that range holds whether you’re dealing with a snapped torsion coil or a tired extension spring. That’s the lead range for most jobs; the written estimate sets the final price once we’ve seen your door. A matched pair is usually replaced together, so a pair typically runs about twice that range – two springs, one visit.

Several things affect where you land: the type of spring (torsion vs. extension), whether one or both need replacing, door weight and panel type, and whether a related cable or drum needs attention. Cable repair runs $130 – $250, so if a frayed cable comes up during the inspection, it’s worth fixing at the same time rather than paying for a second visit.
How to avoid overpaying: ask for the spring spec, confirm whether the quote is for one spring or a pair, and don’t accept a full opener replacement when only the spring failed. Our approach is diagnosed and fixed, not replaced and upsold. Every estimate is free, and the price is agreed before we start – you won’t find a bigger invoice waiting at the end.
Garage Door Spring Repair Near Arlington – Our Service Area
We serve homeowners across garage door spring repair in Intracoastal West and throughout the surrounding area, including garage door spring repair in Oceanway, plus Riverside, Avondale, San Marco, Southside, Baymeadows, Deerwood, Ortega, Nassau Village-Ratliff, and Yulee. A snapped spring is a same-day priority when we can fit you in, and most local calls get a fast response window between 7am and 7pm. If you’re outside the Arlington core, tell us your location and we’ll confirm coverage on the call.
Serving Arlington, FL – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Arlington
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance your door’s weight. Without a working spring, the door is far too heavy to lift safely and the opener can’t move it. Our service covers the spring itself, plus the cables, drums, and balance checks that go with it.
Most spring jobs are done in a single visit, and a straightforward torsion or extension spring replacement can often be completed within a couple of hours. The timing depends on whether it’s one spring or a matched pair, and whether a related cable or track issue turns up during inspection. We’ll give you an honest estimate when you call.
Garage door spring repair in Arlington typically runs $180 – $340 for one spring, with a matched pair usually about twice that. The written estimate sets the final price, and we quote and agree it before any work starts. Call (866) 937-7921 for an exact quote – estimates are free.
Yes – we service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers. Our technicians know how each brand’s doors and openers interact with spring tension and travel limits, which helps us diagnose the issue on the first visit. Tell us your make and model when you call.
We treat a snapped spring as a same-day priority when we can fit you in, with fast dispatch between 7am and 7pm. A broken spring leaves your door unsafe to use, so don’t force it – call us and we’ll get a technician out. For work outside the usual hours, call and we’ll book you for the next available slot.
Warranty terms vary by part and job, so we’ll tell you exactly what’s covered in writing with your estimate. We don’t make blanket promises we can’t back up – you’ll know what you’re getting before we start. Ask your technician on the visit and they’ll spell it out.
Clear the area around the door, move cars out of the garage, and don’t try to lift or operate the door before we arrive. Note what the door is doing – the sound, whether it moves, any visible break – so we arrive prepared. If you can, have the make and model of your door and opener handy.
Schedule Your Garage Door Spring Repair Service in Arlington Today
Don’t wait for a snapped spring to strand your car or risk a dangerous manual lift. Call (866) 937-7921 to book your Arlington Garage Door Repair Co spring repair, with free estimates, upfront pricing, and same-day service when we can fit you in. We’ll diagnose the problem, fix it right, and quote the price before any work starts – no obligation, no surprises. Your door, our specialty.
Written by the team at Arlington Garage Door Repair Co.