Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arlington?
Garage door repair in Arlington, FL typically costs $150 – $600, depending on what’s actually broken. A snapped spring runs $180 – $340 for one spring, a tune-up with new rollers sits near the bottom of that range, and a full new door installation runs $700 – $2200. Every job starts with a free estimate, and the written estimate we hand you is the price you pay.
Most homeowners call us for one of three reasons: the door won’t open, the door opens crooked, or the opener hums and does nothing. Each one points to a different repair, which is why the range is wide until we’ve seen the door. Call (866) 937-7921 and we’ll get a technician out to look at it.
Key Takeaways
- Typical garage door repair in Arlington runs $150 – $600, with spring repair at $180 – $340 per spring.
- Opener installation is $250 – $550; a full new door list runs $700 – $2200.
- We work with the brand already in your garage: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Most repairs are diagnosed and fixed on the same visit where possible, which keeps the bill down.
- Springs and cables are high-tension parts. Never take them apart yourself. Call a trained technician.
Garage Door Cost Breakdown (2026)
Here’s how garage door costs shake out in Arlington for 2026. These are typical estimated ranges. The written estimate sets the final price.
| Service | Typical Estimated Cost |
|---|---|
| Garage door repair (mixed jobs) | $150 – $600 |
| Spring repair, one spring | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A note on spring pricing: the $180 – $340 figure covers one spring. Most doors use two springs and they’re usually replaced as a matched pair, so a pair costs about twice that range. We’ll tell you straight whether the second spring is worth doing now or later. It usually is, since the two carry the same load and the same age.
What pushes a job toward the top of a range is usually opening the door up to something we weren’t expecting: a bent track behind the panel, a frayed cable nobody mentioned, an opener that’s been limping along for a while. What keeps a job at the bottom is catching it early. A roller and track job is a fraction of a door replacement.
What Affects Garage Door Pricing in Arlington
- Which part failed. A snapped spring is a different repair than a bent track, and the price follows the part. Spring repair and opener repair sit at different points on the range, so the diagnosis has to come first.
- Brand and model of your door and opener. Arlington homes carry a wide mix. LiftMaster and Chamberlain openers are common on newer builds; Genie and Craftsman units show up in plenty of older garages, and Clopay, Amarr, Wayne Dalton, and Raynor doors are all out there too. We know these brands, so we’re not guessing at parts or wiring.
- Age of the door. Doors that have been hanging for a long stretch tend to stack up small problems: worn rollers, a stretched spring, a track that’s drifted out of plumb. One repair visit catches them together instead of paying for three separate trips.
- Whether parts are on hand. A door that needs a same-day roller or bearing usually gets one, because we keep parts work built into the service instead of “we’ll have to order that.” A door that needs a discontinued panel takes longer.
- Opener electronics vs. mechanical work. Opener repair covers two different kinds of job. A safety sensor out of alignment is quick. A logic board or motor is a bigger fix, and that’s where the range widens.
- Repair vs. replacement. Our default is to fix what’s fixable. When the math favors a new door, we’ll show you why rather than upsell you into it.
Arlington’s climate plays a smaller role in door wear than the local humidity does. Mild winters mean springs don’t rust out as fast as they do up north, but warm, damp summers keep the metal sweating, and the moving parts behind it wear from use, not from weather. Doors that open and close several times a day wear faster than a door that gets a workout once a week, regardless of the season.
What Does Garage Door Repair in Arlington Cover?
A repair visit covers whatever’s keeping the door from working: a spring, a cable, a track, a roller, a hinge, or an opener that’s stopped responding. Most of what we’re called out for in Arlington falls into a handful of repeat jobs.
Here’s the way a repair call usually goes. We diagnose the door first, then talk through the part and the price before any work starts. If the job is a straightforward repair, we handle diagnosis, parts, and repair in the same visit where possible. No second appointment, no callback. That’s true for standard garage door repair in Arlington calls and for the specific repairs below.
Garage door spring repair is the repair that needs the most care. A torsion spring under tension stores a dangerous amount of force, and a technician who hasn’t been trained on high-tension parts can get hurt. We treat spring work as its own specialty: we measure, we use the right tools, and we don’t hand a homeowner a pair of winding bars and wish them luck. If your door is heavy, won’t stay up, or made a loud bang and stopped, it’s a spring problem. Expect $180 – $340 for one spring.
Garage door opener repair covers the electronics. A door that won’t respond to the remote, reverses on the way down, or grinds at the end of its travel is usually an opener issue, not a door issue. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, and we diagnose before we recommend a new unit. Most openers can be repaired for $120 – $320 rather than replaced.
Garage door cable repair is often called for alongside spring work, since both parts share the load. A frayed or popped cable makes the door fang crooked, and it’s a safety concern the same way a spring is. Cable repair is $130 – $250.
Garage door track repair handles doors that have jumped the track, been bumped by a car, or drifted out of alignment. Track realignment is $120 – $240. It’s a quick job when it’s just the track, but always worth a full inspection, since a knocked track usually means a bent panel too.
Garage door panel replacement covers dents, dings, and sections damaged by impact. Panel replacement is $250 – $500. Storm and impact damage is the usual reason, since hail is uncommon here but a backed-up vehicle or a blown branch isn’t.
If the door has reached the point where repair costs approach replacement, we walk you through garage door installation as an option and get a new door running. New door installation runs $700 – $2200. And for a new opener on the existing door, garage door opener installation is $250 – $550.
How to Save on Garage Door Cost in Arlington
Saving money on a garage door comes down to a few practical moves, and none of them involve skipping maintenance.
- Fix small problems before they compound. A worn roller that costs a fraction of a track realignment will turn into a track realignment if you wait. A noisy door is usually warning you.
- Get the free estimate first. We don’t charge for an assessment, so you’ll know the scope before you commit. Call (866) 937-7921 and we’ll get it scheduled.
- Repair before you replace. A door with one bad spring doesn’t need a new door. A door with a failed opener doesn’t either. We repair what’s repairable and only bring up replacement when it’s actually the cheaper path.
- Do the pair when you replace one spring. Replacing both springs at once costs more up front than replacing one, but it saves you paying the labor twice when the second one fails. It usually will, and soon.
- Don’t take apart a high-tension part yourself. A spring or cable under tension can cause serious injury. This is the one area where a DIY attempt costs far more in the long run than a call to a trained technician.
- Keep the door maintained. A yearly check of the moving parts, a light lubrication on the rollers and hinges, and a listening ear for new noises go a long way toward keeping small problems small.
Our technicians have up to 13 years of experience on the springs, cables, tracks, and openers that fail on Arlington doors. That experience is the cheapest tool in the toolbox, and it’s why we’re not going to recommend a repair that isn’t actually needed.
FAQs – Garage Door Cost
How much does garage door repair cost in Arlington?
Typical garage door repair in Arlington runs $150 – $600. The exact figure depends on the part: spring work sits at $180 – $340 per spring, cable repair at $130 – $250, and opener repair at $120 – $320. Call (866) 937-7921 for a free estimate and we’ll narrow it down.
How much does it cost to replace a garage door spring in Arlington?
Spring repair is $180 – $340 for one spring. Most doors run two springs and they’re usually replaced as a matched pair, so a pair costs about twice that range. The written estimate is the final price. Call (866) 937-7921 to get one.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper than replacement when the door’s panels, tracks, and hardware are in solid shape. A new door installation runs $700 – $2200, while most repairs come in at $150 – $600. If the door has multiple failed sections or the opener itself is beyond repair, replacement can make more sense. We’ll give you the repair-first answer, and the replacement number if it’s genuinely the better option. Call (866) 937-7921 for the estimate.
How much does a new garage door opener cost in Arlington?
Opener installation is $250 – $550. If the existing unit can be repaired, that runs $120 – $320, and we’ll always tell you that first. Call (866) 937-7921 and we’ll diagnose the opener before recommending anything.
Can you come today?
In most cases, yes. We offer same-day service and fast dispatch from 7am to 7pm, so a door that won’t close doesn’t have to wait. Call (866) 937-7921 and we’ll book the soonest available visit. Estimates are free.
Where We Serve
We handle garage door repair, opener repair, installation, parts, and spring repair across Arlington and the surrounding area. That includes homeowners in areas like Arlington Garage Door Repair Co and nearby communities. If you’re not sure whether your address is covered, call and ask.
Talk to Us About Your Door
If your garage door is stuck, noisy, or just due for a check, call (866) 937-7921 for a free estimate. We work on the brand already in your garage, diagnose before we recommend, and handle parts, repair, and installation under one company. One call covers it. Our technicians have up to 13 years of experience, and the written estimate is the price.
Pricing reflects the Arlington market as of 2026. Arlington Garage Door Repair Co offers free estimates. Call (866) 937-7921.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Daniel Pruitt"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Eric Anderson"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Cole Fletcher